Billet Performance Products 1JZ-GTE Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Toyota 1JZ-GTE

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end and a -6 centre return for positive leak free operation. Fittings are also supplied with the kit including a -6 block off if centre return is not to be used.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products 1JZ-GTE VVTi Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Toyota 1JZ-GTE VVTi

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end and a -6 centre return for positive leak free operation. Fittings are also supplied with the kit including a -6 block off if centre return is not to be used.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products 1UZ-FE Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Toyota 1UZ-FE

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products 2JZ to GM Transmission Adaptor Plate

The Billet Performance Products GM Transmission adaptor will adapt any GM Transmission to the 2JZ.

This will work great for Powerglide, TH400, TH350 and so on.

Straight bolt on.

Comes with ARP high strength bolts.

The GM Transmission adaptor is made from 6061 T6 Billet alluminium.

Quantity

Price: $595.00

Loading Updating cart…

Billet Performance Products 2JZ-GTE Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Toyota 2JZ-GTE

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end and a -6 centre return for positive leak free operation. Fittings are also supplied with the kit including a -6 block off if centre return is not to be used.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products 4G63 (EVO 3) Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Mitsubishi 4G63 EVO 3 & VR4.

The kit is designed to suit 14mm top feed injectors.

The kit comes with adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $350.00

Loading Updating cart…

Billet Performance Products 4G63 (EVO 4-6) Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Mitsubishi 4G63 EVO 4, 5 & 6.

The kit is designed to suit 14mm top feed injectors.

The kit comes with adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $350.00

Loading Updating cart…

Billet Performance Products 4G63 (EVO 7-9) Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Mitsubishi 4G63 EVO 7, 8 & 9.

The kit is designed to suit 14mm top feed injectors.

The kit comes with adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $350.00

Loading Updating cart…

Billet Performance Products Bosch 11mm EV14 1000cc Fuel Injector Adaptor

Billet Performance Products long series 11mm injector adaptor

  • Suits Bosch EV14 550cc, 725cc & 1000cc 3/4 length injectors
  • Black anodised and supplied with injector clip to ensure a leak free setup
Quantity

Price: $9.00

Loading Updating cart…

Billet Performance Products Bosch 14mm 2000cc Long Fuel Injector Adaptor

Billet Performance Products long series 14mm injector adaptor

  • Suits Bosch 2000cc short injectors, Seimens Deka 80lb short injectors
  • Black anodised and supplied with injector clip to ensure a leak free setup
Quantity

Price: $9.00

Loading Updating cart…

Billet Performance Products Bosch 14mm EV14 1000cc Fuel Injector Adaptor

Billet Performance Products long series 14mm injector adaptor

  • Suits Bosch EV14 550cc, 725cc & 1000cc 3/4 length injectors
  • Black anodised and supplied with injector clip to ensure a leak free setup
Quantity

Price: $9.00

Loading Updating cart…

Billet Performance Products CA18DET 11mm Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan CA18DET.

The kit is designed to suit 11mm top feed injectors.

The kit comes with adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $345.00

Loading Updating cart…

Billet Performance Products CA18DET 14mm Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan CA18DET.

The kit is designed to suit 14mm top feed injectors.

The kit comes with adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $350.00

Loading Updating cart…

Billet Performance Products FJ20ET Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan FJ20ET

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with seals for injector to manifold and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products Fuel Rail Fitting 920-06

Billet Performance Products is now supplying AN fittings that suit our rails separately

  • AN -6 Flare fitting with an AN -6 ORB
  • As used and supplied in all our fuel rail kits
Quantity

Price: $7.50

Loading Updating cart…

Billet Performance Products Fuel Rail Fitting 920-06-08

Billet Performance Products is now supplying AN fittings that suit our rails separately

  • AN -6 Flare fitting with an AN -8 ORB
  • As used and supplied in all our fuel rail kits
Quantity

Price: $7.50

Loading Updating cart…

Billet Performance Products JZA80/JZZ30 Solid Diff Ear Mounts

Billet Performance Products has developed billet suspension bushes for the JZA80 supra & JZZ30 Soarer.

Quantity

Price: $220.00

Loading Updating cart…

Billet Performance Products Nissan RB Drag CDI Kit

Billet Performance Products have developed a Drag Pencil Coil kit to suit the Nissan RB DOHC Series Engine.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your Drag RB DOHC engine comes with

  • 1 x Billet Performance Products Pencil Coil Adaptor Kit
  • 1 x M&W Pro-Drag 6 CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 6 x Denso Iridium Spark Plugs
  • 6 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 2000hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $3,160.00

Loading Updating cart…

Billet Performance Products Nissan RB Street/Race CDI Kit

Billet Performance Products have developed a Pencil Coil kit to suit the Nissan RB DOHC Series Engine.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your RB DOHC engine comes with

  • 1 x Billet Performance Products Pencil Coil Adaptor Kit
  • 1 x M&W Pro-16B CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 6 x Denso Iridium Spark Plugs
  • 6 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 1300hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $2,590.00

Loading Updating cart…

Billet Performance Products Nissan SR20 Drag CDI Kit

Billet Performance Products have developed a Drag Pencil Coil kit to suit the Nissan SR20 Engine.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your Drag JZ engine comes with

  • 4 x Billet Performance Products Pencil Coil Adaptor Rings (Only Needed for S13 & S14)
  • 1 x M&W Pro-Drag 6 CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 4 x Denso Iridium Spark Plugs
  • 4 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 1000hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $2,095.00

Loading Updating cart…

Billet Performance Products Nissan SR20 Street/Race CDI Kit

Billet Performance Products have developed a Pencil Coil kit to suit the Nissan SR20.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your JZ engine comes with

  • 4 x Billet Performance Products Pencil Coil Adaptor Rings (Only Needed for S13 & S14)
  • 1 x M&W Pro-14 CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 4 x Denso Iridium Spark Plugs
  • 4 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 800hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $1,800.00

Loading Updating cart…

Billet Performance Products Precision 46mm Wastegate Sensor Top

Billet Performance Products is now supplying billet wastegate tops to suit the 46mm Precision Turbo wastegate

The wastegate top kits have the following features:

  • 1/8th NPT top port thread
  • Double o-ring seals built into the top for a leak free install
  • Kit comes complete with wastegate top, sensor and wiring
Quantity

Price: $445.00

Loading Updating cart…

Billet Performance Products RB25DET Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan RB25 (Not Neo).

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

  • EV14K  Size Injectors (33.7mm) eg. Injector Dynamics ID2000/ID1300/ID850 or Bosch 2000cc
  • EV6/EV14 Size injectors (48.7mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc without adaptors
  • EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc (full length injectors will not fit under standard intake manifold)

Designed to also work with genuine GReddy intake manifolds

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end and a -6 centre return for positive leak free operation. Fittings are also supplied with the kit including a -6 block off if centre return is not to be used.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products RB26DETT Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan RB26.

The kit is designed to suit 14mm top feed injectors.

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with all parts needed to fit the fuel rail kit straight to the suitable vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each end for positive leak free operation.

Product Options
Combination of product variants is not available
Quantity

Price: $395.00

Loading Updating cart…

Billet Performance Products SR20DET S13 Fuel Injector Plenum Adaptor

Billet Performance Products is now providing the injector to manifold adaptors to suit injectors with a 14mm lower o-ring

  • Suits the Nissan S13 SR20DET
  • Black anodised with o-ring seal to ensure a leak free setup
Quantity

Price: $8.00

Loading Updating cart…

Billet Performance Products SR20DET S13 Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan S13 SR20DET.

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes:
EV14K Size Injectors (33.7mm) eg. Injector Dynamics ID2000/ID1700/ID1300/ID850 or Bosch 2000cc
EV14 Size injectors (48.7mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc without adaptors
EV1/EV6L/EV14 with 14mm Adaptors (60.3mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc with adaptors or Bosch Indy Blue 1600cc (full length injectors may have bonnet clearance issues on some models)

Designed to also work with genuine GReddy intake manifolds

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation.

Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $350.00

Loading Updating cart…

Billet Performance Products SR20DET S14 & S15, RB25 Fuel Injector Plenum Adaptor

Billet Performance Products is now providing the injector to manifold adaptors to suit injectors with a 14mm lower o-ring

  • Suits the Nissan RB25DET, S14 & S15 SR20DET
  • Black anodised with o-ring seal to ensure a leak free setup
Quantity

Price: $8.00

Loading Updating cart…

Billet Performance Products SR20DET S14/S15 Fuel Rail Kit

Billet Performance Products have developed a direct bolt on fuel rail kit for the Nissan SR20DET S14/S15.

The kit is designed to suit 14mm top feed injectors.

The kit comes with all adaptors to fit the following injector sizes

EV14K  Size Injectors (33.7mm) eg. Injector Dynamics ID2000/ID1700/ID1300/ID850 or Bosch 2000cc

EV6/EV14 Size injectors (48.7mm) eg ID1000/ID725 or Bosch 1000cc, 725cc, 550cc

The fuel rail is CNC machined from 6061-T6 billet aluminum, with a full 16mm ID through bore the fuel rail is designed to support over 800HP.

Each fuel rail kit has been coated with type II bright dip anodized finish in either Red, Blue, Black or Purple that looks great and protects against corrosion.

Each kit comes complete with o-ring seal injector to manifold adaptors and all parts needed to fit the fuel rail kit straight to the vehicle.

Each Billet Performance Products fuel rail is machined to suit -8 O-ring seals on each for positive leak free operation. Fittings are also supplied with the kit.

Product Options
Combination of product variants is not available
Quantity

Price: $495.00

Loading Updating cart…

Billet Performance Products SR20DET S14/S15 Plenum Spacer

Billet Performance Products is now providing the plenum spacer that comes with our SR20DET S14 & S15 Kits seperately

  • O-rings both sides to eliminate the factory gasket
  • Black anodised with o-ring seal to ensure a leak free setup
  • 12mm Thick
Quantity

Price: $80.00

Loading Updating cart…

Billet Performance Products Toyota JZA80 6 Speed Tailshaft Adaptor

Billet Performance Products offer a tailshaft conversion plate to suit a 6 speed twin turbo Supra.

The plate converts the standard 3 finger flange to a 1350 series 4 bolt pattern.

The plate is made from 7000 series alloy and comes complete with high tensile bolts to suit.

This plate is designed to suit a Toyota JZA80 6 Speed.

Quantity

Price: $160.00

Loading Updating cart…

Billet Performance Products Toyota 1JZ / 2JZ Drag CDI Kit

Billet Performance Products have developed a Drag Pencil Coil kit to suit the Toyota 1JZ-GTE or 2JZ-GTE Engine.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your Drag JZ engine comes with

  • 1 x Billet Performance Products Pencil Coil Adaptor Kit
  • 1 x M&W Pro-Drag 6 CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 6 x Denso Iridium Spark Plugs
  • 6 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 2000hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $3,160.00

Loading Updating cart…

Billet Performance Products Toyota 1JZ / 2JZ Street/Race CDI Kit

Billet Performance Products have developed a Pencil Coil kit to suit the Toyota 1JZ-GTE or 2JZ-GTE Engine.

The kit is designed around the tried and proven Denso pencil coils.

The adaptors are made from 6061 T6 Billet Aluminium.

The Ultimate Ignition System for your JZ engine comes with

  • 1 x Billet Performance Products Pencil Coil Adaptor Kit
  • 1 x M&W Pro-16B CDI Ignition Amplifier
  • 1 x Complete Shielded & Terminated wiring harness using mil-spec wiring
  • 6 x Denso Iridium Spark Plugs
  • 6 x CDI Pencil Coils

This ignition system has been track proven and is capable of over 1300hp

The ignition system comes ready to install, just hook up to the battery and splice in your signal wires from the ecu with the supplied connector.

Product Options
Combination of product variants is not available
Quantity

Price: $2,590.00

Loading Updating cart…

Billet Performance Products Toyota JZZ30, JZA80 Auto & Non Turbo Manual Tailshaft Adaptor

Billet Performance Products offers a tailshaft to diff conversion plate to suit a Toyota 3 Bolt diff pattern.

The plate converts the standard 3 finger flange to a 1350 series 4 bolt pattern.

The plate is made from 7000 series alloy and comes complete with high tensile bolts to suit.

The plate is designed to suit a Toyota Soarer JZZ30 or a Toyota Supra JZA80 5 Speed and Auto.

Quantity

Price: $160.00

Loading Updating cart…

Billet Performance Products Toyota Serpentine Tensioner Pulley

Billet Performance Products have developed a serpentine tensioner pulley to suit a Toyota 2JZ.

The pulley is made from 6061 T6 Billet Alluminium.

The pulley comes coated black with type II bright dip anodized finish.

Pulley comes complete with bearing.

 

Quantity

Price: $135.00

Loading Updating cart…

BPP 1/2 BSPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 1/2 BSPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (24.5mm x 2mm) for ease of locating fitting
Quantity

Price: $7.50

Loading Updating cart…

BPP 1/2 NPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 1/2 NPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (24.5mm x 2mm) for ease of locating fitting
Quantity

Price: $7.50

Loading Updating cart…

BPP 1/8 BSPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 1/8 BSPT weld on fittings have the following features:

Flanged base for ease of welding

Made from 6061-T6 billet aluminium

Stepped base (11.9mm x 2mm) for ease of locating fitting

Quantity

Price: $4.50

Loading Updating cart…

BPP 1/8 NPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 1/8 NPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (11.9mm x 2mm) for ease of locating fitting
Quantity

Price: $4.50

Loading Updating cart…

BPP 14mm Toyota 1JZ / 2JZ Fuel Injector Plenum Adaptor

Billet Performance Products is now providing the injector to manifold adaptors to suit injectors with a 14mm lower o-ring

  • Suits the Toyota 1JZ and 2JZ engines
  • Black anodised with o-ring seal to ensure a leak free setup
Quantity

Price: $8.00

Loading Updating cart…

BPP 3/4 BSPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 3/4 BSPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (29.5mm x 2mm) for ease of locating fitting
Quantity

Price: $8.90

Loading Updating cart…

BPP 3/4 NPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 3/4 NPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (29.5mm x 2mm) for ease of locating fitting
Quantity

Price: $8.90

Loading Updating cart…

BPP 3/8 BSPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 3/8 BSPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (20mm x 2mm) for ease of locating fitting
Quantity

Price: $6.80

Loading Updating cart…

BPP 3/8 NPT Surface Mount Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The 3/8 NPT weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (20mm x 2mm) for ease of locating fitting
Quantity

Price: $6.80

Loading Updating cart…

BPP AN -12 Male Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The AN-12 weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (18.5mm x 2mm) for ease of locating fitting
Quantity

Price: $9.00

Loading Updating cart…

BPP AN -4 Male Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The AN-4 weld on fittings have the following features:

  • Flanged base for ease of welding
  • Made from 6061-T6 billet aluminium
  • Stepped base (7.35mm x 2mm) for ease of locating fitting
Quantity

Price: $4.80

Loading Updating cart…

BPP Bosch 10.5mm Nissan GTR EV14 1000cc Fuel Injector Adaptor

Billet Performance Products has produced the short series 10.5mm injector adaptor for guys wanting to run factory Nissan fuel rails.

  • Suits the Nissan RB26DETT, CA18DET & RB20DET factory fuel rails
  • Suits Bosch EV14 550cc, 725cc & 1000cc 3/4 length injectors
  • Black anodised and supplied with injector clip to ensure a leak free setup
Quantity

Price: $9.00

Loading Updating cart…

BPP GM Air Temp Weld On Fitting

Billet Performance Products is now supplying aluminium weld on fittings for your fabrication needs.

The GM Air Temp weld on fitting

M14 x 1.5mm thread.

Made from 6061-T6 billet aluminium.

Stepped base (18mm x 2mm) for ease of locating the fitting.

Quantity

Price: $8.00

Loading Updating cart…

BPP Injector 14mm Weld In Bung

Billet Performance Products is now supplying aluminium 14mm weld on injector fittings for your fabrication needs.

 

Made from 6061-T6 billet aluminium

Quantity

Price: $8.00

Loading Updating cart…